20 foolproof solutions to fix iPhone not ringing issue

20 foolproof solutions to fix iPhone not ringing issue

In today’s information age, silence always remains Iphone More than just annoying. Left unaddressed, this seemingly insignificant problem can ruin everything from personal relationships to performance at work.

Before things get out of hand, it’s best to move toward resolving the problem right away. To help you out, we’ve compiled a list of 20 The most effective solutions to iPhone not ringing issue. Do every repair carefully to avoid the hassle of an expensive repair.

1. Check if your iPhone is in silent mode

If your iPhone is not ringing for incoming calls, you should first check if it has been left on silent mode. Anyone can make this rookie mistake, so it’s best to review and then eliminate it as a viable solution from scratch.

The easiest way to check if your iPhone is in silent mode is to check a file Side key. This is located above the volume buttons on the top left of your phone. If the key is pressed down to be closer to the back of the iPhone, then it is in silent mode and therefore will not ring for any calls or texts. A thin orange line can also be seen above the slider to indicate this.

You have to push this key up to be closer to the screen, making the orange line hidden from view. This will turn off silent mode.

2. Disable Do Not Disturb

The do not disturb The feature makes it so that your phone does not make any noise to prevent disturbing its user. An iPhone in this mode will not ring for any incoming calls so it is imperative that you check it immediately.

open the control center On your iPhone and look for a button with a crescent moon image and the word to focus. Depending on your iPhone model, Control Center can be accessed by either swiping down at the top right or by swiping up from the bottom.

If Do Not Disturb mode is enabled, the crescent moon will be highlighted in purple. To get your iPhone out of this case, just tap the crescent moon again until it becomes transparent.

3. Turn off Airplane mode

iPhones in Airplane mode disconnect from all communication services, including cellular, Wi-Fi, and Bluetooth. If this is the case, you will not be able to receive any calls at all.

To turn off Airplane Mode, open the control center By swiping right on your screen and looking for an icon with an airplane image. If it is highlighted in orange, then your phone is stuck in airplane mode.

Tap the icon again until it’s not highlighted to turn off Airplane mode on your iPhone.

4. Restart the iPhone

Restarting your phone can help get rid of unresolved issues for which there seems to be no solution.

If you have an older iPhone that features a home button, you can turn off your phone by pressing and holding the power button on the right until the prompt appears Scroll to turn off the iPhone displayed. Pressing the power button again will wake up the phone and restart it.

For newer models, you can turn off your iPhone by simultaneously pressing Power Volume up button On the left side with Power button on the right.

5. Disconnect the bluetooth devices

Accidentally left on a Bluetooth device such as earphones can also be another cause of the problem. If your iPhone is left connected to a Bluetooth device, you won’t be able to hear your phone ring from its speakers.

The easiest way to fix this is to turn off Bluetooth on your iPhone. open the control center And look for an icon with a Bluetooth symbol.

If this icon is highlighted in blue, it means that bluetooth is on and the device may be connected. Clicking the icon will disconnect all Bluetooth devices. To disconnect a specific device, go to bluetooth class in settings The app and review the list of recognized devices.

6. Change the selected ringtone

It might be possible that the ringtone you set for your iPhone isn’t annoying enough for you to realize that your phone is ringing. Changing the ringtone can help solve this problem.

  • open the settings app and go to file Sounds and tactile sensations class
  • Clicking this will bring up a menu showing sounds and vibration patterns for ringtone, text tone, mail, etc.
  • tap on ring tone And select the most striking sound from the list of available sounds

7. Manually increase the ringtone volume

If your iPhone is making a faint noise when you receive incoming calls, it’s possible that the ringtone volume is too low. This can be easily fixed in one of two ways.

Locate two buttons on the left side of your iPhone that are right next to each other. The button on top increases the volume of your ringtone while the button on the bottom decreases it.

If pressing these buttons has no effect on the volume of your ringtone, it is likely broken. In this case, you can still manually adjust the ringtone volume in Settings.

  • open the settings app and go to file Sounds and tactile sensations class
  • under Ringtone and alerts There will be a scroll bar
  • Set this to increase or decrease the volume to fix your iPhone not ringing issue

8. Check the ringtone assigned to the selected contacts

If your iPhone is not ringing properly for only specific contacts, it might be possible to set a custom ringtone for them.

  • open the Contacts application and search for the contact you want
  • On the page showing their information, tap release in the upper right corner
  • tap on ringtone to cCheck which ringtone is assigned to that specific contact
  • Try marking it as shortening And see if this is able to fix the problem

9. Review the list of blocked contacts

If updating the ringtone of a particular contact still can’t fix the problem, they may have been accidentally added to your blocked contact list. In this case, you will not be notified of the person’s calls at all.

  • open the settings app and go to the category named phone
  • Scroll down to see Blocked communications
  • Clicking this will bring up a list of phone numbers that you have blocked. Review it carefully.

In the event that you would like to remove a phone number from this list, click release in the upper right corner and select this number. Once removed, it will no longer be shown in the list and you will be able to receive calls from that contact again.

10. Disable Call Forwarding

When call forwarding is turned on, phone calls are diverted to another number automatically leaving your phone clear of notifications. To check if this is enabled, follow the steps below.

  • open the settings app and go to file phone Selection
  • tap Call forwarding
  • Make sure that the toggle switch is not highlighted in green, which indicates that this feature is disabled

11. Disable the silence of unknown callers

Unknown callers may be automatically silenced if this feature is left enabled.

  • open the settings app and click phone
  • next to Silence is unknown callerscheck if it is “off” or “on”
  • Toggle the switch to disable this feature

12. Turn off calls on other devices

This feature helps you to receive calls on other devices with the same apple Identification card Like your Mac, iPad, iPod, etc. Turning it off may help fix the problem.

  • open the settings application and press phone
  • Scroll down to see calls on other devices
  • Make sure the toggle switch is set to the off position

13. Turn off attention

If you have a newer iPhone model that supports face id, The attention Aware The feature may cause your iPhone to not ring or to ring very softly at certain times. This is because the phone is trying to detect if your attention is already focused on the screen, in which case the loud ringer isn’t necessary if there is an incoming call.

This feature, while useful at times, may make a wrong assessment which results in your iPhone not ringing even if your focus is shifted. To fix the problem, you can turn off this feature in settings.

  • Go to Accessibility Then press Face recognition and detection
  • Recognition Attention features Toggle it on and off
  • You may be asked to confirm with your password

Once you verify the password, your iPhone will now ring regardless of whether or not your attention is on the screen.

14. Check for third party call blockers

Sometimes, third party apps may gain access to your phone blocking some incoming calls from passing through.

  • open the settings app and go to phone
  • Scroll down and tap a call Prevention and identification
  • Review the list of apps that contain blocked numbers and choose to remove them individually

15. Update to the latest version of the apps

Sifting through every app in your phone to check if they are affecting your iPhone’s ringtone can be daunting. To avoid this, you can simply update all apps to their latest version in hopes that their developers will be able to fix the problem.

  • open the Application a store and press Profile personly top right of the screen.
  • You will see a list of pending updates.
  • tap on update all And wait for all apps to be restored to their latest versions.

16. Clean the iPhone speaker

If none of the above options work for you, then this is most likely an issue with your iPhone. You can try cleaning the speaker to free any trapped dirt or debris that might be blocking the space and preventing it from ringing properly.

You can use a soft-bristled brush to glide over the top speaker and thin toothpicks to slide them in and out of the speaker holes on the bottom of your iPhone. An air blower can also be used here, provided it is positioned low enough not to accidentally cause damage to the hardware.

Use a soft brush to clean the iPhone speakers | wikiHow

17. Clean the headphone jack

On older iPhone models, a dirty headphone jack can make it sound as if there is a device connected to the phone and thus cause it to not ring from its speakers.

You can clean the headphone jack with a cotton tip dipped in some rubbing alcohol. A simple paperclip can also get the job done, provided you are very careful. Keep in mind that rubbing too hard may damage the device and make your problem worse. Follow This guide For a more detailed tutorial.

Use a Q-Tip to clean the headphone jack | wikiHow

18. Update to the latest IOS version

Apple is always making updates to its software to ensure that any bugs that users encounter are dealt with. Keep your iPhone updated with the latest iOS Release can be a simple yet effective solution to fix this problem.

You can check for a new software update in the Settings app. If a new iOS version is available, it will be displayed near the top. tap on Installations To update your iPhone.

19. Reset network settings

If the problem persists, you can try resetting the network settings. By doing so, you can unpair Bluetooth devices, delete saved Wi-Fi networks, and restore default network settings for all other settings. Your personal information will remain the same.

  • open the settings application and select general
  • Scroll down until you see an option Transfer or reset iPhone
  • Click on Reset and select Reset network settings

20. Factory reset your iPhone

If all else fails, the last resort is to soft reset your iPhone, erasing all data and settings so that the phone returns to its new default look. You should only do this after backing up any important passwords, photos, or documents stored on your phone as there will be no way to retrieve them once the phone is reset.

To reset your iPhone:

  • open the settings application and press general
  • Scroll down until you see an option Transfer or reset iPhone
  • tap on Erase all content and settings And click Confirm once the popup is generated

One of these solutions is bound to get your iPhone back to the ringing state. However, if there is a serious hardware failure under the hood, the absolute last resort is to take it to an Apple Store or a trusted technician for diagnosis. If your device is under warranty, repairs won’t be unreasonably expensive. Make sure you try every fix mentioned in this guide before moving ahead for hardware repair.

#foolproof #solutions #fix #iPhone #ringing #issue

Leave a Comment

Your email address will not be published. Required fields are marked *